http://www.eu.onkyo.com/en/irajax/en/products/a-9030-85849.html/cHJvamVjdC5jb21tb24udXJsU2hvcnRlbmVyOw==

Technical Details

Features

FEATURES

  • 65 W/Ch (8 Ω, 1 kHz, 0.08% THD, 2 Channels Driven, IEC)
  • Three-Stage Inverted Darlington Circuitry
  • WRAT (Wide Range Amplifier Technology)
  • Phase-Matching Bass Boost
  • High-Current Low-Impedance Drive
  • Thick, Low-Impedance Bus Bar for Perfect Ground Potential
  • Two 8,200 µF Capacitors 
  • Optimum Gain Volume Control
  • Direct Mode
  • 1.6 mm Full Flat Chassis
  • Aluminum Front Panel
  • Tone Control (Bass/Treble/Balance)
  • 5 Analog Audio Inputs and 1 Output
  • Phono Input (MM)
  • Subwoofer Pre-Out
  • Speaker A/B Drive
  • Banana Plug-Compatible Speaker Posts
  • Headphone Jack
  • RI (Remote Interactive) Remote Control

WRAT (Wide Range Amplifier Technology) for Naturally Vivid Sound
Onkyo developed the WRAT suite of technologies to improve the clarity and character of amplified audio. The technologies work to reduce noise across the frequency range, guaranteeing a clear, balanced, and natural sound. It achieves this by employing a low negative feedback amplifier design, preserving the essential energy and life contained within the recording; using closed ground-loops to cancel unwanted noise from individual circuits; and by enabling high current flows to cancel reflex energy from the speakers.
 
Innovative Three-Stage Amplifier Circuit Brings Your Music to Life
While some hi-fi makers take a shortcut to amplified audio with the use of cheap all-in-one IC chips, the resulting sound is often compromised once you turn the volume up. Instead, on the A-9030, Onkyo uses the same Three-Stage Inverted Darlington Circuitry technology it uses in its high-end A/V receivers and Reference Series hi-fi separates. This innovative circuit topology facilitates high speaker-driving power, reduces distortion, and preserves the buoyancy and expressiveness of recorded music—a unique characteristic of our low negative feedback amplifiers.
 
Optimal Gain Volume Control Guarantees Cleaner Sound
Conventional volume-attenuation methods involve initially dropping a signal close to the amplifier’s natural noise floor at low volumes. The signal can then become tainted with noise, which subsequently gets amplified along with the signal. Onkyo’s Optimum Gain Volume Control Circuitry adjusts the gain so that less than half the typical amount of attenuation is necessary. The signal never comes close to the noise floor, and the result is noticeably clearer sound when compared to conventional amplifier designs.
 
Phase-Matched Bass Boost for Deeper Bass and a Clearer Mid-Range
From the warm low notes produced by a cello to the deep frequencies of electronic music, a good amplifier should be able to deliver plenty of bass without distorting. Some amplifiers are prone to the effects of phase shifting, which can overwhelm middle frequencies and muddy the overall sound. Our Phase-Matching Bass Boost technology effectively preserves mid-range clarity—allowing vocals and strings to shine—while maintaining a smooth, natural bass response at all volume levels.
 
Discrete Output Stage Circuitry Means Cooler Running Temperatures
A receiver’s ability to deliver high power into low impedances is a vital factor in its performance. If the current flow through the amplification circuit is inconsistent, audio quality will suffer. Onkyo stereo amplifiers feature separate high-quality components at the signal output stage. Discrete transistors help guarantee a consistent, stable supply of current to the speaker system for an open and assured performance, with less chance of distortion and cooler running temperatures.
 
High-Output Power Supply to Drive Your Speakers
At the heart of all our amplifiers, you’ll find a power supply that can maintain or increase output power as required. Musically, this means that you have deep, powerful bass; wide-ranging dynamics; musical peaks that sound composed; and correct timbre and sound staging. When paired with a set of quality loudspeakers, Onkyo amplifiers have the capability to drive them with ease. In the case of the A-9030, you will find a high-output power transformer, two 8,200 µF capacitors, and a low-impedance bus bar for perfect ground potential. All work in concert to enhance the power and fidelity of your audio sources.
 
Quality Construction Equals Better Performance
A vital factor in any audio component is its build quality. It’s not just about good looks. The build quality of the chassis, the construction techniques used, the electronic parts chosen—all combine to shape the outputted audio signal. The A-9030’s anti-resonant chassis is designed to isolate the audio signal from any vibrations that may cause interference during the amplification process. This chassis is superbly finished with an aluminum front panel and volume control that accentuate the quality of the construction throughout.
 
System Control with One Remote Using Onkyo RI (Remote Interactive)
Onkyo’s RI system lets you operate multiple RI-compatible audio components through a single remote control. On the rearside of the A-9030, you’ll find RI ports to link other components (such as a CD player or tuner), enabling limited control of your hi-fi setup using just one remote. RI capability also adds functionality when Onkyo’s RI Dock for iPod is connected to another component. These include System On/Off, Auto Power On, and Auto Selector.

Current Product: A-9030

Complete Datasheet

Print all information for this product including pictures, text, features, reviews and specifications

Datasheet .pdf (1.06 MB)

Download Acrobat Reader to view PDF files. Download from Adobe.