http://www.eu.onkyo.com/en/irajax/en/articles/firmware-update-tx-rz720-139961.html/cHJvamVjdC5jb21tb24udXJsU2hvcnRlbmVyOw==

Firmware Update TX-RZ720

We are pleased to offer this firmware update for the best possible performance of your AV Receiver.

TX-RZ720
(Version 1050-5010-2030-0008)

  • Adds support for new multi-room audio playback function "FlareConnect".
    *All audio devices in group and "Onkyo Controller" App is required to update to the latest version.

    Setup Guide: www.intl.onkyo.com/next_generation/setup.html 
    Introduction of multi-room audio functions: www.intl.onkyo.com/next_generation

  • Improvement for pass-through function of Dolby Vision signal.
  • Minor bug fixes and improvements stability.

To check if your firmware is the latest version, go in to Setup -> Hardware Setup -> Firmware Update and check the version number. If any of the numbers differ from the latest version available, please update your unit.

Update via USB storage 

Note: Please remove the wired/wireless connection before updating through USB.
Please prepare a USB storage device such as a USB flash memory stick. You need at least 128 MB of available space to update the firmware. Please unpack the ZIP file onto an empty USB Stick which has been formatted with the FAT file system. 
We hope you enjoy the improved functionality this update provides to your AV Receiver.

Precautions for the Firmware Update

Please read the update instructions carefully before beginning.
The firmware update should take 30 to 40 minutes. Once the update begins, don't turn off the power supply to the A/V receiver until it is time to restart it.
Depending on the conditions of the network, a firmware update via a network may take more than one hour or even fail to finish. If the update is not completed within two hours, turn off the power supply by pushing the ON/STANDBY button and then try updating again from the beginning.
Updating the firmware and adjusting the settings will be done automatically, but may take some time to complete. Please follow the procedures as instructed when you update. Note that the update may fail, or cause problems for your A/V receiver, if you do any of the following:

  • Pull out the A/V receiver’s power cord;
  • Interrupt the power supply to the A/V receiver (e.g. if the breaker is tripped or if there is an electrical outage);
  • Insert or remove the LAN cable from a device in your network when updating over a network;
  • Insert or remove a USB memory device from the A/V receiver when updating via USB;
  • Operate components connected to the A/V receiver via HDMI, such as a TV or a recording device.
If your A/V receiver is damaged for any of the reasons above, an Onkyo service center will repair the unit for a fee.

If you see "No Update" on the front panel immediately after you have started the firmware update process, you have the latest firmware. In this case it is not necessary to do this update.

Downloads

Firmware

RSS News

Pioneer & Onkyo Europe GmbH debuts new FlareConnect™ Wireless Multi-room Audio Distribution system

Pioneer & Onkyo Europe GmbH is pleased to announce FlareConnect™, its next generation, in-house developed wireless… more

Press Release dated: 26 Oct 2017
Light and colours as intense and vibrant as in nature: Dolby Vision – the new video standard on home cinema receivers from Pioneer and Onkyo

Whether sunset, blue sky, autumn leaves or evening shadows, nature offers a huge variety of impressions of colour and… more

Press Release dated: 28 Sep 2017
DTS Play-Fi, Onkyo and Pioneer announce support of Amazon Alexa Connected Speaker APIs

Voice control of select DTS Play-Fi-enabled products, including Onkyo and Pioneer Home A/V products, via Alexa-enabled… more

Press Release dated: 31 Aug 2017
Smart Speaker P3 with Alexa Adds DTS Play-Fi® Technology to Bring Multi-room Music Streaming to Connected Homes

Home entertainment specialists Onkyo announce Smart Speaker P3 (VC-PX30), a lifestyle concierge speaker with Amazon Alexa… more

Press Release dated: 31 Aug 2017
Onkyo Smart Speaker G3 Adds Game-changing Hi-Fi Sound to the Google Assistant and Brings Voice-Controlled Multi-room Audio to Any Speaker with Chromecast built-in

Onkyo today unveils the game-changing Smart Speaker G3 (VC-GX30) combining intelligence of the Google Assistant and… more

Press Release dated: 31 Aug 2017

Current Catalogue

Catalog ONKYO Audio Video Products 2017-2018
Download pdf (54.08 MB)