http://www.eu.onkyo.com/en/irajax/en/articles/firmware-update-ns-6130-135371.html/cHJvamVjdC5jb21tb24udXJsU2hvcnRlbmVyOw==

Firmware Update NS-6130

We are pleased to offer this firmware update for the best possible performance of your  Receiver.

NS-6130
(Version 2089-6000-0000-0008)

How to update

There are two methods for updating the firmware: via network and via USB. The update may take about 5 minutes to complete for either method: via network or via USB. Furthermore, existing settings are guaranteed regardless of the method used for update.

* For the latest information on updates, visit our company’s website. There is no need to update the firmware on this unit if there is no update available.
* When performed over the network, it may take even more time depending on the connection status.
* During an update, do not
– Disconnect and reconnect any cable or USB storage device, or perform any operation on the component such as turn off its power
– Accessing this unit from a PC or smartphone using an application

Disclaimer: The program and accompanying online documentation are furnished to you for use at your own risk. We will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying online documentation, regardless of legal theory, and whether arising in tort or contract.  In no event will we be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever.

Updating the Firmware via Network
* Check that the unit is turned on, and the connection to the Internet is secured.
* Turn off the controller component (PC etc.) connected to the network.
* Stop any playing Internet radio, USB storage device, or server content.

1. "Network" is displayed on the display when SETUP on the remote controller is pressed.
2. Press UP/DOWN and ENTER to select “Update” - “via Network” in order.
* “Update” is not displayed if there are no firmware updates.
3. Press ENTER to start the firmware update.
* “Completed” is displayed when the update is complete.
4. Press <ON> to switch the unit to standby. The process is completed and your firmware is updated to the latest version.
If an error message is displayed : When an error occurs, “ * - ** Error!” is displayed on the display of this unit. Check the following:
* * -01, * -10 : Ethernet cable not found. Connect the
Ethernet cable properly.
* *-02, *-03, *-04, *-05, *-06, *-11, *-13, *-14, * -16, * -17, * -18, * -20, * -21 : Internet connection error. Check the following:
– The router is turned on
– This unit and the router are connected via the network
Try to disconnect and then connect again the power to the unit and router. This may solve the problem. If you are still unable to connect to the Internet, the DNS server or proxy server may be temporarily down.
Check the service status with your ISP provider.
* Others : Disconnect then reconnect the power cord,
then repeat from the beginning.

Updating via USB
* Prepare a 128 MB or larger USB storage device. FAT16 or FAT32 file system format.
* Delete any data stored on the USB storage device.
* Turn off the controller component (PC etc.) connected to the network.
* Stop any playing Internet radio, USB storage device, or server content.
* Some USB storage devices may take long to load, may not be loaded correctly, or may not be correctly fed depending on the device or their content.
* We will not be liable whatsoever for any loss or damage of data, or storage failure arising from the use of the USB storage device with this unit. Thank you for your understanding.

1. Connect the USB storage device to your PC.
2. Download the firmware file from our company’s website to your PC and unzip.
Firmware files are named in the following way:
ONKNAP **** _ ************ _ *** .zip
Unzip the file on your PC. The number of unzipped files and folders varies depending on the model.
3. Copy all unzipped files and folders to the root folder of the USB storage device.
* Make sure to copy the unzipped files.
4. Connect the USB storage device to the USB port of this unit.
* If you connect a USB hard disk drive to the USB port of the unit, we recommend that you use its AC adapter to power it.
* If the USB storage device has been partitioned, each section will be treated as an independent device.
5. "Network" is displayed on the display when SETUP on the remote controller is pressed.
6. Press UP/DOWN and ENTER to select “Update” - “via USB” in order.
* “Update” is not displayed if there are no firmware updates.
7. Press ENTER to start the firmware update.
* “Completed” is displayed when the update is complete.
8. Press <ON> to switch the unit to standby. The process is completed and your firmware is updated to the latest version.
9. Remove the USB storage device from this unit.

If an error message is displayed : When an error occurs, “ * - ** Error!” is displayed on the display of this unit. Check the following:
* * -01, * -10 : USB storage device not found. Check whether the USB storage device or USB cable is correctly inserted to the USB port of this unit.
Connect the USB storage device to an external power source if it has its own power supply.
* * -05, * -13, * -20, * -21 : The firmware file is not present in the root folder of the USB storage device, or the firmware file is for another model. Retry from the download of the firmware file.
* Others : Disconnect then reconnect the power cord, then repeat from the beginning.

Downloads

Firmware

RSS News

Pioneer & Onkyo Europe GmbH debuts new FlareConnect™ Wireless Multi-room Audio Distribution system

Pioneer & Onkyo Europe GmbH is pleased to announce FlareConnect™, its next generation, in-house developed wireless… more

Press Release dated: 26 Oct 2017
Light and colours as intense and vibrant as in nature: Dolby Vision – the new video standard on home cinema receivers from Pioneer and Onkyo

Whether sunset, blue sky, autumn leaves or evening shadows, nature offers a huge variety of impressions of colour and… more

Press Release dated: 28 Sep 2017
DTS Play-Fi, Onkyo and Pioneer announce support of Amazon Alexa Connected Speaker APIs

Voice control of select DTS Play-Fi-enabled products, including Onkyo and Pioneer Home A/V products, via Alexa-enabled… more

Press Release dated: 31 Aug 2017
Smart Speaker P3 with Alexa Adds DTS Play-Fi® Technology to Bring Multi-room Music Streaming to Connected Homes

Home entertainment specialists Onkyo announce Smart Speaker P3 (VC-PX30), a lifestyle concierge speaker with Amazon Alexa… more

Press Release dated: 31 Aug 2017
Onkyo Smart Speaker G3 Adds Game-changing Hi-Fi Sound to the Google Assistant and Brings Voice-Controlled Multi-room Audio to Any Speaker with Chromecast built-in

Onkyo today unveils the game-changing Smart Speaker G3 (VC-GX30) combining intelligence of the Google Assistant and… more

Press Release dated: 31 Aug 2017

Current Catalogue

Catalog ONKYO Audio Video Products 2017-2018
Download pdf (54.08 MB)